Applying Rubba-Roof Compound

applying Rubba-Roof compound

  • Surfaces must be clean and dry before application
  • Do not open the product before you are ready to start applying it
  • Do not put any solvents or thinners into Rubba-Roof. Please note this is a viscous material – not a paint
  • If hard to open tap side of can to dent and get leverage
  • We recommend that you first treat the areas requiring fleece reinforcement
  • Use a masking tape to protect vulnerable adjacent surfaces
  • Apply an even coat to a minimum depth of 1mm using the depth gauge supplied. You can use a stiff paint brush or our recommended low pile roller. Both are available from our shop.

Using Rubba-Roof FleeceBuy Rubba-Roof